The Body-Solid Fusion 500/2 home gym features materials and parts of only the highest quality and durability. The 500 frame features continuous; four sides welded construction instead of the typical 2-side welds that have become common in the industry. The Fusion 500 features 50mm x 100mm 11 oval gauge tubing and 6mm upper support plates.
Due to the multiple workout stations, it provides a lot of versatility, allowing you to perform more than 60+ gym-quality exercises. As a result, it is one of the best home gyms you can find at this price point. Station to station, the Body-Solid Fusion 500 provides you with a superior workout experience.
The Fusion 500’s single-stack, multi-function approach to home gym design provides you with an amazingly versatile workout. For example, isolate individual muscles or introduce functional training into your routine to establish and sustain improved coordination, balance, and stability.
The multi-grip press arm system also delivers deep and practical muscle interaction for chest, incline, and shoulder press movements. The Fusion 500 includes a 210-pound weight stack. Two pre-cabled accessory attachment points enable you to add the Multi-Hip Station (FMH), Leg Press (FLP), and Weight-Assisted Dip/Pull-Up (FCDWA) (two attachments maximum, sold separately).
Learn more in my complete review below!
Product: Body-Solid Fusion 500/2 Home Gym (210 lbs weight stack)
Warranty: In-home Lifetime on everything (original owner). You name it, and it’s covered 100%
My rating: 9.5/10
Affiliate Disclosure: As an Amazon Affiliate Program participant, I earn commissions on purchases made through links in this post. Full disclosure
Please note: The pictured images contain optional equipment which sells separately.
Details and Specifications
- Assembled dimensions: 76L x 48W x 83H inches (193L x 122W x 211H cm)
- Assembled weight: 755 lbs (342.4 kg)
- Weight stack: 210 lbs (95.3 kg)
- Possible exercises: 60+
- Warranty: Lifetime
F500/2 Frame construction
The Body-Solid Fusion 500/2 home gym is a trainer made almost entirely from steel tubing. Most bars in its structure are 50mm x 100mm 11 oval gauge tubing, while the support plates are 6mm thick. Like many other gyms, they have a 4-side precision welded construction instead of 2-side welds. Thus, it results in a much higher sturdiness.
Since it’s machine-made almost wholly of steel and its 210 lbs (140.6 kg) plate stack, it weighs approximately 955 lbs (342.4 kg). In addition, this means that it provides a lot of stability for most exercises and improves overall sturdiness.
The unit’s bases have several rubberized pads. However, it’s advisable to assemble it on a rubberized mat due to its weight, which will prevent any damage to the floor.
All the steel parts in its construction come with an electrostatically applied powder finish resistant to corrosion, chipping, and scratching. It’s also straightforward to maintain.
This Body-Solid home gym is not extremely large without any optional attachments compared to other cable machines. It’s 79″ (193 cm) long and 80″ (122 cm) wide. However, to perform the exercises correctly and without hindrance, it’s advisable to have two clearance feet around the gym.
The unit’s highest point reaches approx. 83″ (211 cm) above floor level. Thus, it should fit in a room with a 7′ ceiling if it’s the case.
Seat and backrest
The seat and backrest are adjustable. The seat has seven upright adjustment positions, while the backrest bar offers nine adjustment positions. Therefore, the machine should accommodate users up to 6’6″ (198 cm) with no problem, allowing a correct execution and a complete range of motion for all exercises.
The pads on the seat and backrest and the rollers on various workout stations integrate DuraFirm material. As a result, they’re tear-resistant and offer superior comfort. In addition, due to the high-density foam, they can deliver a lifetime of support without bottoming out or changing shape, even with daily use.
The unit’s cables are coated with a polyurethane sheet, providing a smooth gliding over the pulleys. Also, all the pulleys integrate industrial grade, sealed ball bearings for a long lifespan and quiet operation.
In addition, they’re made of fiberglass reinforced nylon material and are highly resistant to wear and tear. Each one precision-matched the thickness of the cables and provided a lifetime friction-free performance.
There are several accessories included with this home gym. I can count the lat pulldown bar, the two ergonomic handles for the side arms, and an ankle cuff.
Optional workout stations and other accessories are available for this unit and are listed below. Images contain pictures of optional equipment.
F500/2 Workout stations
The Body-Solid Fusion 500/2 home gym offers several workout stations. These are:
Lat pulldown station. The high pulley station can perform lat pulldown exercises and train triceps, shoulder, and back muscles, along with the standard lat bar. For this purpose, the lat bar comes with a layer of rubber material for a secure grip.
Adjustable side arm station. This is a feature that not many other home gyms have. This workout station consists of two adjustable side arms with pivoting pulleys. For example, it’s similar to the arm station of the BodyCraft Xpress Pro. The side arms offer nine adjustment positions, while their cables come with standard D-type handgrips.
Although the machine doesn’t have a conventional butterfly station, these two side arms allow you to perform cable fly exercises, stand-up curls, shoulder presses, trunk rotations, baseball swings, etc.
Adjustable chest press. To begin with, this workout station doesn’t double as a fly station. It features six adjustment positions, two for seated rows and four for chest presses. Furthermore, its arms come equipped with ergonomic, multi-grip handles featuring a layer of rubber foam material to prevent hand slippage.
Leg developer. This element allows you to perform leg extensions and standing leg curls. Hence, it is equipped with 4″, high-density foam rollers to provide the optimal comfort for these exercises.
Low pulley station. The low pulley to which the leg developer permits the execution of various exercises. For instance, with a short bar and chain attached to it, or merely the D-handles, this workout station allows you to perform stand-up curls, stand-up rows, seated rows, etc.
This Body-Solid Fusion F500/2 has 20 weight plates, each one weighing 10 lbs (4.5 kg), while the top stopper plate weighs 10 lbs (4.5 kg) for a total of 210 lbs (95.3 kg).
There also are 2.5 lbs (1.13 kg) and 5.0 lbs (2.26 kg) plate adapters available, but these accessories do not come with the machine.
One of the machine’s main pluses is that the weight plates are solid cast iron. As a result, they’re considerably more durable than cement/vinyl plates, and with proper care, they can last a lifetime.
Furthermore, the weight stack glides on two parallel beams; in particular, this assembly type adds stability to each exercise’s motion. In addition, two metallic side guards conceal the weight stack, leaving only the selectorized section with the pop-pin available to prevent accidents.
F500/2 Possible Exercises
- Triceps Pushdown
- French Press
- Standing French Press
- Triceps Press
- Triceps Extension
- Cross Triceps Extension
- Rope Pushdowns
- Standing Hammer Grip Curls
- Standing Biceps Curl
- Seated Biceps Curl
- Reverse Grip Triceps Pushdown
- Triceps Kickback
- Reverse Curl
- Biceps Curl
- Seated Wrist Extension
- Standing Wrist Curls
- Standing Wrist Extension
- Standing Trunk Rotation
- Trunk Rotation
- Standing Oblique Crunch
- Kneeling “Wood Chop”
- Kneeling Low to High Trunk Rotation
- Reverse Crunch
- Seated Abdominal Crunch
- Seated Oblique Abdominal Crunch
- Standing Wide Angle Lat Row
- Narrow Pulldowns with Hand Grips
- Seated Lat Rows
- Stiff Arm Pulldown
- Standing Lat Row High Pulley
- Standing Lat Row Low Pulley
- Seated Low Back Extension
- Standing Low Back Extension
- Shoulder Pullover
- Reverse Grip Lat Pulldown
- Wide Pulldowns
- Seated Press
- Cable Fly
- Cable press
- Resisted Punch
- Cable Crossover
- Standing Chest Press
- Standing Chest Fly
- Leg Extension
- Prone Leg Curls
- Standing Hip Flexion w/ Knee Flexion
- Standing Leg Kickback
- Ankle Eversion
- Ankle Inversion
- Hip Abduction
- Hip Adduction
- Standing Hip Internal Rotation
- Standing Hip External Rotation
- Leg Press
- Rear Deltoid Rows
- Standing Lateral Shoulder Raise
- Seated Shoulder Press
- Standing Shoulder Press w/ Alternating Motion
- Standing Shoulder Press
- Front Shoulder Raise
- Standing Front Shoulder Raise
- Shoulder Extension
- Shoulder Shrug
- Scapular Protraction
- Reverse Fly Cable Cross
- Seated Lateral Shoulder Raise
- Standing Shoulder Extension
F500/2 Assembly and Maintenance
The Body-Solid Fusion 500/2 home gym comes in four reasonably large and heavy boxes; thus, it’s advisable to be transported and assembled by at least two people.
The assembly process isn’t exactly the easiest and may take quite a few hours and many pieces to put together. However, the included manual provides pretty clear assembly instructions and schematics. Unfortunately, the tools for assembly do not come with the Fusion 500/2.
This home gym doesn’t require much maintenance. However, it’s advisable to periodically grease the weight stack’s metallic rods to ensure a smooth journey for the plates. Occasionally, pulleys may need lubrication. It’s also advisable to regularly check for loose parts and bolts and retighten as needed.
Please note: The pictured images contain optional equipment which sells separately.
- Sturdy and heavy frame, offering excellent stability;
- The aesthetic design can also serve as a motivation factor;
- Adjustable seat and backrest;
- DuraFirm upholstery and thick padding for optimal comfort;
- Five workout stations, including press station, adjustable arm station, lat pulldown station, low pulley station, and leg developer attachment;
- Multiple grip possibilities for the chest press;
- 4″ thick rollers for the leg developer element;
- Nine adjustment positions for the lateral pulley arms;
- 4 + 2 adjustment positions for the chest press;
- 180° rotating pulleys on the lateral pulley arms;
- Heavy-duty pulleys and cables;
- Accessories included: two pulling handles, lat bar, and ankle strap;
- Highly durable, cast iron weight plates;
- 210 lbs weight stack;
- Over 60+ exercises available;
- Little maintenance is required;
- Excellent warranty.
- No conventional fly press;
- Assembly tools do not come with the Fusion 500/2;
- Leg press not included.
Body-Solid Fusion 500/2 Home Gym Summary
In short, the Body-Solid Fusion 500/2 is a home gym offering a 210 lbs metallic weight stack and five workout stations, including a lat pulldown station, press station, adjustable arm station, low pulley station, and leg developer.
It has a highly durable construction, similar to commercial-grade trainers. Accordingly, it excels in ergonomics, featuring an adjustable seat and backrest with DuraFirm upholstery and top-quality 4″ foam rollers for the leg developer and knee stoppers.
Thus, it’s one of the best home gyms that you’ll be able to find; and finally, even though it’s not exactly an affordable machine, it does offer excellent value and quality for the price.
I hope you found this article helpful and informative. Would you please speak up if you have anything you’d like to share on the topic or any opinions about my website? I look forward to your comments, questions, and the sharing of ideas.
Please note: Before starting any exercise program, you should consult your physician to determine if you have any medical or physical conditions that could put your health and safety at risk or prevent you from using the equipment properly. In addition, your physician’s advice is essential if you are taking medication that affects your heart rate, blood pressure, or cholesterol level.