The Valor Fitness BD-7 Power Rack with Lat Pull offers a vast range of strength training exercises to help you achieve a sculpted “ripped” physique. Moreover, the Valor Fitness BD-7 Power Rack offers intense strength exercises including lat pulldowns, squats, military press, pull-ups and more!
The Valor Fitness BD-7 is constructed with a sturdy 2×2” steel mainframe and features four solid steel chrome adjustable weight bar supports, two solid steel squat safety bars and 17 variable positions for bar supports ranging in height from 17.5” up to 68”. This power rack is compatible with a 7ft Olympic size barbell (sold separately).
If you are buying this rack to set up in your home gym, then chances are you will usually be working out without a spotter. This is why Valor Athletics has included a set of high-quality safety rails, together with two sets of adjustable bar supports.
These allow you to perform important mass building exercises, including squats and bench presses without the fear of getting ‘pinned’ under the bar. The bar supports come in a couple of different lengths. The shorter set is designed to hold the bar before you start the exercise, while the more extended set is useful for catching the bar if you can’t entirely complete the rep.
Learn more in my complete review below
Product: Valor Fitness BD-7 Power Rack with Lat Pull
Warranty: Frame 3 years / Cables 2 years / Pulleys 1 year / Other parts 1 year
My rating: 8.75/10
Amazon Affiliate Disclosure: I may earn commissions on purchases made through links in this post.
Details and Specifications
- Assembled dimensions: 59L x 63W x 86H inches (150L x 160W x 218.5H cm)
- Assembled weight: 135 lbs (61.2 kg)
- Maximum weight capacity:
- 500 lbs (226.8 kg) for the bar catchers outside of the cage;
- 650 lbs (294.8 kg) for the bar catchers inside the cage;
- 800 lbs (362.8 kg) for the safety bars;
- 350 lbs (158.7 kg) for the pull-up bar.
- Possible exercises: 40+
- Warranty: Frame 3 years / Cables 2 years / Pulleys 1 year / Other parts 1 year
The frame of this home gym system is 12 gauge square steel tubing, with a metallic pewter finish. The assembled machine is heavy enough (approx 135 lbs) to providing required stability for exercises; thus, you won’t need to bolt it to the floor. Its bases don’t have holes for bolting it down.
However, if you do wish to secure it to the floor or pavement, you can always drill a few holes in it. The bases also come with rubber base caps, thus the frame features an excellent “grip” onto the floor; it shouldn’t slide or tilt, in case you will perform exercises such as around the world pull-ups.
The frame is rather large. Its footprint is approx. 47″ (120 cm) wide, and 59″ (150 cm) long. However, the machine’s total width is approx. 63″ (160 cm), due to the lateral weight plate support pegs. Furthermore, it requires 2′ (61 cm) of clearance on each side, 2′-3′ at the front and at least 1′ of clearance at the rear, for user safety.
The inner space of the cage is rather spacious with the distance between the vertical bars being approx — 44″ (112 cm). When it comes to its height, the assembled frame reaches 86″ (218.5 cm). In other words, it’s taller than 7′, so you will have to place it in a room with at least an 8′ ceiling.
The pulleys equipped on the machine are heavy-duty nylon material, not steel. However, they shouldn’t wear out for at least 2-3 years of use, even if you work out every day. They also integrate sealed ball bearings for prolonged use. The cables are steel-made, coated with a sheet of PVC.
The Valor Fitness BD-7 power rack does not include a weight bar, nor any weight plates. You’ll have to purchase these accessories additionally or use the ones you already have. It’s for use with Olympic, 7′ bars. A lat pulldown bar and a short bar for low pulley exercises are (included) though. Also, the top of the frame integrates a bar for pull-ups.
BD-7 Catch Bars and Safety Bars
The vertical bars of the frame feature 17 adjustment positions for the catch bars and safety bars. The first adjustment hole is placed at 17.5″ (44.5 cm) above ground, while the top one is at 68″ (173 cm). The distance between the adjustment holes is approx. 1″ (2.5 cm).
There are 4 catch bars supplied with this power rack, which you can install on the inside and outside. Also, there’s a set of two safety bars provided with the machine. The number of the weight plate storage pegs supplied 4, 2 for each side of the frame. They’re 1″ pegs, for Standard weight plates, each one being 8″ (20.3 cm) long.
You can store Olympic plates on them too, even if you won’t use a 2″ peg adapter. The Olympic plates will be loose on the supplied standard pegs, but if you secure them with springs, they shouldn’t fall off or rattle. The weight bar attached to the cable of the machine also features 1″ sleeves.
A bar with a 4″ thick foam roller comes with the rack. This bar is meant to be attached to the safety bars of the machine. It’s a helper bar for lat pulldowns. Knees go under it; therefore if you’re going to perform lat pulldowns with a heavy load, it will prevent you from lifting yourself from the bench.
Also, if you’re not too heavy, and will be performing lat pulldowns with a less heavy load, you can sit on the foam support, if you won’t be using a bench.
This Valor Fitness power rack includes three main workout stations. These are:
High pulley station with lat pulldown bar – offering the possibility to perform various exercises for the back, arm and shoulder muscles;
Low pulley station with straight T bar – for stand-up curls, triceps kickbacks, stand-up rows, squats, etc.
Pull-up station – consisting of a simple, solid steel bar, with a chrome finish and knurled grips. This bar does not feature curved, outer handles.
Of course, the cage is a workout station itself, as it offers the possibility to perform a wide array of weight bar exercises, or bench exercises. A bench accessory is not included with this power rack though. If you choose to purchase a bench, take a look at the Valor Fitness DD-11 Flat / Incline Utility Bench.
Dip handles (Valor Fitness MB-A) can be attached to the vertical bars of the frame as well. However, these accessories are also not included.
BD-7 Possible Exercises
- Wide grip pull-ups
- Muscle pull-ups
- Behind head pull-ups
- Around the world pull-ups
- One-arm pull-ups
- Weighted pull-ups
- Close grip chin-ups
- Wide grip chin-ups
- One hand chin-ups
- Weighted chin-ups
- Hanging knee raises
- Hanging leg raises
- Lat pulldowns
- Close-grip pulldowns
- Behind head pulldowns
- Aerobic rowing
- Kneeling rowing
- Biceps curls
- Triceps press downs
- Chest presses
- Single-arm chest presses
- Wide grip chest presses
- Close grip chest presses
- Cable crunches
- Cable twist crunches
- Seated trunk rotations
- Standing trunk rotations
- Stand-up leg curls
- Calf raises
- Single-leg squats
- Kneeling single-leg squats
- Wide squats
- Twisting squats
- Jumping squats
- Hip extensions
- Hip adductions and hip abductions
- … and more
BD-7 Assembly and Maintenance
The whole frame of the Valor Fitness BD-7 requires assembly; however, the process is pretty much straightforward. An assembly manual offering step-by-step instructions are (supplied). However, tools for construction are not (included), so you’ll be needing two adjustable wrenches. The whole assembly shouldn’t take more than two hours.
When it comes to maintenance, there’s nothing much required. In case the pulleys begin to squeak, a little bit of lubrication should solve the problem. Also, the periodic check of the bolts, nuts, and joints of the machine is required.
- Sturdy, all-steel frame;
- Three workout stations, including lat pulldown station, pull-up bar, and low pulley station;
- Smooth pulley and cable movement;
- 17 attachment positions for the catch bars and safety bars;
- 4 catch bars,n 2 safety bars included;
- Excellent weight capacity, catch bars being able to support more than 500 lbs (226.8 kg);
- Knee stopper bar with foam roller included;
- Lat pulldown bar included;
- Short T bar for low pulley exercises included;
- Pull-up bar included;
- Over 40 possible exercises;
- Quiet operation;
- Little maintenance required;
- Fairly easy to assemble.
- No curved handles for the pull-up bar, which might be an inconvenience for some users;
- Not meant for 6′ bars;
- Ankle strap for leg exercises not included.
Valor Fitness BD-7 Power Rack Summary
The Valor Fitness BD-7 power rack is a home gym system that offers the possibility to perform more than 40 exercises. It features a very sturdy frame, with decent weight capacity, integrating three distinctive workout stations. Additionally, it comes with two sets of catch bars, one set of safety bars, the frame offering 17 positions for them.
Although it may not be the best choice for a powerlifter, this power rack can offer an excellent training setting for beginners and intermediate level users. And finally, considering that with the current discounts it costs less than $500, it’s safe to say that this particular fitness equipment offers excellent value for the price.
I hope you found this article helpful and informative. If you have anything that you’d like to share or any opinions about my website, please do speak up. I look forward to your comments, questions, and the sharing of ideas.