The Body-Solid DLAT-SF Pro Dual Lat & Mid Row Machine design is impressive, with advanced structural engineering and biomechanics. The machines are innovative and feature robust materials that increase the durability of frequent use. In addition, the frame’s exterior features electrostatically applied powder coating with 11-gauge oval tubing for additional comfort and protection.
The high-density foam rubber handgrips and handles make exercising easier because there is less pressure. The aircraft cables withstand 2500 lbs of force (1133.9 kg) and are .217 inches in diameter (5.5 mm). Durafirm upholstery, constructed with two-inch high-density foam, is featured on the seat and can withstand the wear and tear of daily use.
The Lat Pulldown with Mid Row Machine also features a no-cable-change design for seamless transitions between long pull and seated row exercises. In addition, adjustable hold-down pads add stability for lifts beyond that of a user’s body weight.
This device is made of quality materials and is highly effective for people who need a quality workout. The variety of exercises is a great way to get effective upper-body training. In addition, this machine provides a total upper body workout and is compact enough to be placed in a small home gym.
Learn more in my complete review below!
Product: Body-Solid DLAT-SF Pro Dual Lat & Mid Row Machine
Warranty: Frame & Welds Lifetime / Pulleys, Bushings, Bearings, Hardware, Plates, Guide Rods Lifetime / Cables, Upholstery, Grips Lifetime (Normal Wear) (see the commercial warranty below)
My rating: is 9/10
Affiliate Disclosure: As an Amazon Affiliate Program participant, I earn commissions on purchases made through links in this post. Full disclosure
Details and Specifications
- Assembled dimensions: 68L x 33W x 83H inches (173L x 84W x 211H cm)
- Assembled weight: 529 lbs (240 kg)
- Weight stack: 210 lbs (95 kg)
- Possible exercises: 15+
- Commercial Warranty: Frame & Welds Lifetime / Pulleys, Bushings, Bearings, Hardware, Plates, Guide Rods 3 years / Cables, Upholstery, Grips 1 year (Normal Wear)
- In-home Warranty: Frame & Welds Lifetime / Pulleys, Bushings, Bearings, Hardware, Plates, Guide Rods Lifetime / Cables, Upholstery, Grips Lifetime (Normal Wear)
DLAT-SF Frame Construction
The Body-Solid DLAT-SF Pro is a commercial-grade lat machine and, therefore, features heavy-duty construction. Its frame comprises 11 gauge 2.375″ x 4.625″ oval steel tubing designed to withstand 24/7 usage within a commercial gym club’s premises. In addition, all the steel parts feature a corrosion-resistant and abrasion-resistant, electrostatically applied metallic gray powder coating.
The fully assembled unit is hefty, weighing over 500 lbs; therefore, its relocation would be difficult once built. In addition, two people are required to carry and assemble the machine. The machine’s base rests on stabilizers with rubber pads for floor protection. However, placing it on a rubber mat is advisable due to its impressive weight.
The unit is relatively large for a lat machine. It is approx. 68″ (173 cm) long and 33″ (84 cm) wide, while its height is approx. 83″ (211 cm). Therefore, it should fit in a room of seven ′ (213 cm), but it will be tight. It is also advisable to leave at least two feet of clearance on each side and front for ease of access and unhindered usage.
One last aspect to note here regards the weight stack covers. Not all home gyms come with such an accessory. Furthermore, they add compactness to the machine and maximize their overall safety.
Bench and Pulleys
The unit’s bench features a durable base made of the same 11-ga ovalized steel bars as the rest of the frame. It has no specified weight capacity because it can support any user. Its exact dimensions are not specified, but it provides plenty of contact surfaces for any user. Its top cushion features 2″ (5 cm) DuraFirm cushioning for optimal comfort.
The machine’s bench comes with a heavy-duty knee stopper featuring 6″ (15 cm) thick foam rollers for each knee. The knee stopper is adjustable; its upright bar has several adjustment positions. Unfortunately, the bench is non-adjustable. In addition, its top is approximately 16″ (40 cm) above floor level.
The Body-Solid DLAT-SF lat machine integrates seven fiberglass-reinforced nylon pulleys. They are all equipped with industrial-grade sealed ball bearings for a prolonged lifespan. The aircraft cables are .217-inch (5.5 mm) steel ropes coated with a layer of PVC material to prevent pulley scratching and deliver a smoother movement. They are both rated for 2,500 lb duty to easily handle the machine’s stack’s 210 lbs (95 kg) weight.
DLAT-SF Workout stations and accessories
The Body-Solid DLAT-SF lat machine makes available two workout stations. These are:
Lat pull-down station (high pulley). It offers the possibility to perform all lat pull-down exercises and tricep press-downs. It includes a standard lat bar with curved grips for optimal comfort. You can also opt for a tricep rope.
Mid-pulley station. This workout station allows for seated rows, woodchops, and other mid-pulley exercises. The machine includes a seated row V-handle for it. However, you can also equip it with an ab crunch harness, a single-grip D-handle, or a short straight bar. Unfortunately, these accessories do not come with the machine.
It’s also important to note that each workout station has its own separate cable. Thus, you don’t have to swap cables if you want alternate exercises. Therefore, it can save time and hassle for each workout session.
The Body-Solid DLAT-SF lat and the mid-row machine come with a 210 lbs (95 kg) weight stack composed of 20 weight plates and 10 pounds (4.5 kg). The top selector plate weighs 10 lbs (4.5 kg), so the stack’s total weight is 210 lbs (95 kg).
The weight plates are heavy-duty cast iron. Therefore, it is one reason it is more expensive than other lat machines; cast iron plates are superior to cement/vinyl plates. The stack features a standard, pin-based selection system, and each plate has a sticker that specifies the weight load.
The unit’s weight stack is upgradeable. For example, you can opt for a 310 lbs stack (140.6 kg) if the included 210 lbs (95 kg) don’t suffice your needs.
DLAT-SF Possible Exercises
The exercise repertoire is not too broad since it’s a fitness machine with only two main workout stations. However, DLAT-SF offers the possibility to perform more than 15 exercises. Among them, I can count:
- Lat pull-downs
- Behind neck lat pull-downs
- Close grip lat pull-downs
- Reverse grip lat pull-downs
- One-arm lat pull-downs
- Straight arm pull-downs
- Standing tricep press downs
- Seated tricep press downs
- Seated rows
- Stand-up rows
- Mid-pulley curls
- Cable crunches
- Cable punches
- High-pulley woodchops
- Mid-pulley woodchops
- and more.
Of course, some of these exercises require extra accessories. For example, using the included V-grip, woodchops are possible, but these can work better with a woodchop bar. Also, for mid-pulley ab crunches, an ab harness is recommended.
DLAT-SF Assembly and Maintenance
The DLAT-SF lat and mid-row machine require complete assembly. It comes in several heavy boxes, so it’s best to have two people for its transport and construction. The assembly will take at least a couple of hours, but it’s far from a complicated task.
The included manual offers detailed step-by-step assembly instructions and schematics. Unfortunately, tools for assembly do not come with the machine; you will need two adjustable wrenches, a set of Allen wrenches, a Phillps screwdriver, and a rubber mallet.
Once fully assembled, you don’t have to worry too much about maintenance. However, it is necessary to periodically lubricate the weight stack’s guide bar for smooth plate movement. Pulleys may also require lubrication from time to time. In addition, it’s best to periodically inspect the machine to ensure that the nuts, bolts, and parts remain tight and to retighten them as needed.
- Heavy-duty commercial-grade construction;
- Aesthetic design;
- Rubber pads on all base contact points;
- Adjustable knee stopper;
- 6″ thick cushions for the knee stopper attachment;
- A sturdy bench with 2″ cushioning and DuraFirm upholstery;
- Heavy-duty nylon pulleys with sealed ball bearings;
- 2,500 lbs tensile strength, PVC-coated cables;
- Mid-pulley station included;
- Standard lat bar with curved grips included;
- Seated row V-grip included;
- 210 lbs weight stack;
- The weight stack is upgradeable to 310 lbs;
- Cast iron weight plates;
- Offers the possibility to perform more than 15+ exercises;
- Reasonably easy to assemble;
- Little maintenance is required;
- Lifetime warranty for all parts.
- The bench is non-adjustable;
- Ab crunch harness and other accessories do not come with the machine.
Body-Solid DLAT-SF Pro Dual Summary
The Body-Solid DLAT-SF is commercial-grade lat and mid-row machine. It features heavy-duty construction and includes a 210-lb cast iron weight stack. In addition, it comes with an adjustable knee stopper featuring 6″ thick cushions. Furthermore, it offers the possibility to perform more than 15+ exercises. In all, it’s a top-quality lat machine, great for any home gym or commercial gym setup and users of all levels.
I hope you found this article helpful and informative. Would you please speak up if you have anything you’d like to share on the topic or any opinions about my website? I look forward to your comments, questions, and the sharing of ideas.
Please remember that you should consult your physician to determine if you have any medical or physical conditions that could risk your health and safety or prevent you from using the equipment properly. In addition, your physician’s advice is essential if you are taking medication that affects your heart rate, blood pressure, or cholesterol level.